- 25 mm tweeter with inverted titanium dome
- rear mounted aluminum heatsink
- powerful neodymium magnet
- ferrofluid-cooled voice coil
- inline crossovers included
- mounting adaptor for flush mounting included
25 mm /1″ Tweeter
The technical and sound highlight of the AXTON AXC systems is the AXC-T25 tweeter, which is also available separately. It has a 25 mm titanium dome with neodymium magnet and a rear aluminum heat sink to ensure stable operating temperature.
Despite the 25 mm standard size, the tweeter is very flat due to the inverted dome structure and can therefore be installed anywhere.
The included inline crossovers allow the use of the AXC-T25 tweeter with factory installed speakers. The inline corssovers come with unfiltered outouts, to connect factory installed mid/woofers.
The AXC-T25 impresses with its clear, fine sound and its outstanding low directivity at high frequencies. Even in the case of extreme off-axis angles where the installation situation is unfavorable, the reproduction is as good as if you were listening direct on-axis.
Clever solution: The AXC-T25 set includes installation adapters for flat, angled, and flush mounting.
The included inline crossover makes the AXC-T25 suitable for upgrading original fullrange speakers in the front doors.
|Peak Input Power||150 W|
|Continuous Input Power (RMS)||120 W|
|Sensitivity (1 W/1 m)||92 dB|
|Frequency Response (-3 dB)||1.5 – 25 kHz|
|Nominal Impedance||4 ohms|
|Cutout Diameter||42 mm|
|Mounting Depth||18 mm|